20-Gauge Pneumatic Hardwood Flooring Trigger Pull Cleat Nailer Kit Safety

20-Gauge Pneumatic Hardwood Flooring Trigger Pull Cleat Nailer Kit Safety
20-Gauge Pneumatic Hardwood Flooring Trigger Pull Cleat Nailer Kit Safety
20-Gauge Pneumatic Hardwood Flooring Trigger Pull Cleat Nailer Kit Safety
20-Gauge Pneumatic Hardwood Flooring Trigger Pull Cleat Nailer Kit Safety
20-Gauge Pneumatic Hardwood Flooring Trigger Pull Cleat Nailer Kit Safety
20-Gauge Pneumatic Hardwood Flooring Trigger Pull Cleat Nailer Kit Safety
20-Gauge Pneumatic Hardwood Flooring Trigger Pull Cleat Nailer Kit Safety
20-Gauge Pneumatic Hardwood Flooring Trigger Pull Cleat Nailer Kit Safety
20-Gauge Pneumatic Hardwood Flooring Trigger Pull Cleat Nailer Kit Safety

20-Gauge Pneumatic Hardwood Flooring Trigger Pull Cleat Nailer Kit Safety
Pneumatic 20-Gauge Hardwood Flooring Trigger Pull Cleat Nailer Kit. Directional exhaust gets rid of trapped smoke. Jam clearing gate mechanism makes it easy-to-use. Safety trigger to provide you protection during use. The next generation from POWERNAIL is engineered and designed with performance in mind. The re-designed FLEX Foot offers a simpler solution for varying wood thicknesses, requiring only a single adjustment. It also slides off the tool allowing you to top nail close to the wall. The nose fits tightly into the nail pocket and slides securely along for superior control. Its new compact size fits tighter to the wall allowing for faster starts and finishes. It has an easy jam clearing gate mechanism. Combine this tool with our patented HD PowerCleats and you can securely fasten a wide variety of flooring, from HDF/MDF core, engineered, laminate and exotic woods.

The Model 2000F is the perfect performance match for the next generation of flooring. Compressor/Air Tool Features: Adjustable Exhaust Port, Fastener Collation. Tools Product Type: Air Tool Kit.

Minimum Recommended Operating Pressure (psi): 70 PSI2. Minimum Fastener Size: 1 in. Air Tool Type: Air Nailer Kit. Maximum Fastener Size: 1-1/4 in. Nail Gauge: NA / Other.

I have been installing for 18 years and when it comes to 3/8 floor you had to full spread glue do.. I have been installing for 18 years and when it comes to 3/8 floor you had to full spread glue down or use a flooring staple gun. I found the PowerNail 2000 F and loved it.

Superior Holding power and no worry about backing out how designed or splitting. Works great, easy to use. Half done and no issues yet. Easy to adjust, have not had a single misfire.

He said it works great! He said it works great! Makes hardwood installation (almost) a.. Makes hardwood installation (almost) a breeze! Easy to adjust and once u so.. Easy to adjust and once u so it no need to readjusting. Bought this product because we were laying Stranded Bamboo Flooring. I tried every type of floor.. I even tried 3 different staplers. Every other product destroyed the tongue or groove of the stranded bamboo flooring product. Also, this thing will drive the cleat through the top of the bamboo flooring and into the sub floor! Not even a standard floor nailer could do that with their 16-Gauge cleats! Our flooring was almost 1/2' thick and it came from flooring liquidators. This was the only product that did not destroy the flooring. The main reason is, the cleat size.

These things are like needles! But, they work great and it fastens the boards to the sub-floor.

Our flooring was almost 1/2 thick and it came from flooring liquidators. Put down 750sf of 3/8 engineered flooring and it worked.. Put down 750sf of 3/8 engineered flooring and it worked perfectly. Ran at 80lbs of air and not a problem. So much easier than gluing floor down. Highly recommend this nail gun. Put down 750sf of 3/8' engineered flooring and it worked.. Put down 750sf of 3/8' engineered flooring and it worked perfectly. Worked out very good Completely satisfied.. Worked out very good Completely satisfied. Never locked up or jammed. We put in 900 sq ft of 3/8' T&G solid bamboo flooring, using 20 gauge 1.25' cleats. The flooring was really hard stuff and the gun and cleats handled it well. We were concerned about the 5.25' wide boards cupping, being only 3/8' thick, so we also put glue down the center of each board. It increased our labor time, but gave us peace of mind.

We put in 900 sq ft of 3/8" T&G solid bamboo flooring, using 20 gauge 1.25" cleats. We were concerned about the 5.25" wide boards cupping, being only 3/8" thick, so we also put glue down the center of each board. So far installed around 450 sq ft of 3/8' strand woven bamboo (#HL655S) using 1' Po.. So far installed around 450 sq ft of 3/8' strand woven bamboo (#HL655S) using 1' Powercleats (#L10020) with 600 sq ft to go. Gone through over 1,500 cleats with no issues or jamming.

Foot is easy to adjust and remove for close-in nailing. Large tapping block and carrying case round out a great package. Tongue splitting can be a problem with the 3/8' stuff, haven't run into many issues with this nailer set around 80 PSI. So far installed around 450 sq ft of 3/8" strand woven bamboo (#HL655S) using 1" Po..

So far installed around 450 sq ft of 3/8" strand woven bamboo (#HL655S) using 1" Powercleats (#L10020) with 600 sq ft to go. Tongue splitting can be a problem with the 3/8 stuff, haven't run into many issues with this nailer set around 80 PSI. This item is in the category "Home & Garden\Tools & Workshop Equipment\Power Tools\Nail & Staple Guns". The seller is "dynamicdeals101" and is located in this country: US.

This item can be shipped to United States.
20-Gauge Pneumatic Hardwood Flooring Trigger Pull Cleat Nailer Kit Safety


Homepage  Archives  Contact Us  Privacy Policy  Service Agreement